0
To reset the maintenance light on a 2006 Toyota Prius, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it remains on, repeat the steps to ensure the process was completed correctly.
What else can I help you with?
How do you reset maintenance light on 2013 prius?
To reset the maintenance light on a 2013 Toyota Prius, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If the light remains on, repeat the process to ensure it was done correctly.
How do you reset the maintenance light 2012 Toyota Prius C?
To reset the maintenance light on a 2012 Toyota Prius C, first turn the ignition to the "ON" position without starting the engine. Press the odometer button until the odometer display shows "Trip A." Then, turn the ignition off. While holding the odometer button, turn the ignition back to "ON" and continue holding the button until the maintenance light blinks and then turns off. Release the button, and the maintenance light should be reset.
How do you Reset Maintenance Warning Light on a 2008 Toyota 4Runner?
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
What does the maint required light on Toyota Prius mean?
The "Maint Required" light on a Toyota Prius indicates that it's time for routine maintenance, such as an oil change or other scheduled service. It typically comes on based on the vehicle's mileage or elapsed time since the last maintenance. This light is a reminder to ensure the vehicle remains in good condition, but it does not indicate a mechanical issue. To reset the light, maintenance must be performed, and the reset procedure followed as outlined in the owner's manual.
How do you reset check engine light for Toyota Prius?
To reset the engine light on a Toyota Prius, disconnect the negative battery cable and let off for about five minutes, then reconnect it. The light should go off after the first couple start ups.
Check maintenance light reset 2009 Prius?
To reset the maintenance light on a 2009 Toyota Prius, start by turning the ignition to the "ON" position without starting the engine. Next, press the odometer button until the odometer reading is displayed. Turn the ignition off, then while holding the odometer button, turn the ignition back to the "ON" position. Continue holding the button until the maintenance light flashes and then turns off, indicating the reset is complete.
How do you reset the maintenance light on Toyota Camry?
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
How do you reset maintenance light on Toyota Corolla 2010?
How do you reset maint read light on 2010 corolla
Reset the maintenance required light on 08 Toyota rav 4?
maintenance with engine
How do you set oil maintenance light on Prius 2010?
To reset the oil maintenance light on a 2010 Prius, first, turn the ignition to the "ON" position without starting the engine. Then, press the accelerator pedal fully three times within five seconds. Finally, turn the ignition off and then back on to verify that the maintenance light has been reset.
How do you reset the maintenance light on a 1999 Tacoma?
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
How do you reset the maintenance reqired light in the 2011 smart key Toyota RAV4?
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
