You will need to pull out the instrument cluster and swap a screw on the back of the speedo unti. Best thing is to totally remove the mechanism on the back of the speedo which is only there for the cam belt light and throw it away.
how do you reset the digital miter timing belt light on Isuzu 2.8 turbo diesel
To reset the alarm system on a 1998 Isuzu Rodeo, first ensure that the vehicle's ignition is turned off. Then, disconnect the battery for about 10 minutes to reset the system. Reconnect the battery, and the alarm should be reset. If the alarm continues to trigger, check the owner's manual for additional troubleshooting steps or consider consulting a professional.
timing belt light rest
how to reset alarm
To reset the alarm system on a 1998 Isuzu Trooper, first ensure the vehicle is unlocked using the key. Insert the key into the ignition and turn it to the "On" position without starting the engine. Then, press and hold the "Unlock" button on the driver's side door while turning the ignition to "Off" and back to "On" again. This should reset the alarm system. If issues persist, consult the owner's manual for specific instructions or consider seeking professional assistance.
pull the battery terminals for like 5 min then out them back on start the car up should work
To disarm the factory alarm on a 2001 Isuzu Rodeo, insert the key into the driver's side door lock and turn it to the unlock position. This should deactivate the alarm system. If the alarm continues to sound, you may need to start the engine with the key to fully reset the system. Always refer to the vehicle's owner's manual for specific instructions related to your model.
How do you reset the alarm for a Ford Laser
The alarm is reset with the remote or by unlocking the door with the key.The alarm is reset with the remote or by unlocking the door with the key.
reset botton for the alarm
To reset an alarm system on a 2005 Honda Civic locate the brain. The brain should have a reset button located on it. Press it to reset the alarm.
To reset a First Alert smoke alarm, locate the reset button on the alarm and press and hold it for a few seconds until you hear a beep. This will reset the alarm and silence any false alarms.