The code can only be reset by an OBD II scan tool, available at any auto parts store or local repair shop. many auto parts stores will read the codes for you and reset the light for free, Auto-Zone comes to mind. Of course, what ever is causing the light to come on will set it again in about a day. The cause must be repaired...
What causes ticking, check engine light, and the check gauges sensor to come on in a 1999 Dodge Durango 5.2L SUV?
no for sure not
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
No. It is illegal, will cause a check engine light and running problems.No. It is illegal, will cause a check engine light and running problems.
That is the check engine light. The engine computer has detected a malfunction and set a trouble code.
The two main symptons would be a check engine light and an oil leak.
Check engine light on, no start, hard start, die off.
Check engine light, low power, poor fuel economy, etc.
To reset the check engine light on a 2003 Dodge Durango, you can disconnect the negative battery terminal for about 15-30 minutes, then reconnect it. Alternatively, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Keep in mind that if the underlying issue isn't resolved, the light may come back on. Always ensure to diagnose any problems indicated by the check engine light before resetting it.
P0442 Evaporative Emission Control System Leak Detected (small leak)
A flashing check engine light indicates a engine condition that could be causing severe catalytic converter damage. The usual cause is a harsh misfire. The engine computer will have set a code, or codes that will help in diagnosis.
Buy or borrow a code scanner to find out what the code is then you'll know for sure.