Disconnect battery cables from battery for 30 minutes and then reconnect battery it then resets.
Unhook the negative cable and wait ten minutes, the computer is reset.
The computer only resets when the battery is removed. The alternator just charges the battery, so if the battery is left connected when the alternator is replaced, the computer should not reset.
you dont
You can use a scan tool, or unhook the battery.You can use a scan tool, or unhook the battery.
The ideal way is to read them with a scan tool, fix the problem , and then reset them with the scan tool. Failing that you can unhook the battery and reset the codes until the failure reoccurs.
drive it about 30 to 50 miles,you reset the computer when you replaced the battery. What you want is info back in the computer ,that is why a minimum of 30 to 50 miles must be driven to put info back in.
A Chrysler LeBaron does not have a reset switch. The fuel pump is controlled by the engine computer with relays.
yes it does
do you have to reset computer after changing battery in 2003 745li
Are you serious?
There is nothing to reset. The computer will function normally when you connect the battery again.
You do not have to reset the computer.