Bring the maintenance schedule program onto the information display. Hold the scroll button in until the maintenance schedule is cleared. The maintenance light should go off.
open the switch with reset button pressed until disapear for 5 secs dont start the engine
There is no reset procedure for thesr lights , if there is a malfunction they will illumunate www.lextechautomotivellc.com
No. Already reset.
To reset the computer on a Lexus SC 430, you can disconnect the car battery by removing the negative terminal for about 15-30 minutes. This will clear any stored codes and reset the computer. After reconnecting the battery, ensure you enter any necessary radio or navigation codes if prompted. Alternatively, you can also use an OBD-II scanner to reset the check engine light and clear diagnostic trouble codes.
It is in the Owner Manual. After turning on the ignition, you press the AC OFF button for 4 second to get in the reset menu.
vehicle stability control
You need gas
What is the bolt pattern for a 2007 Lexus LS 430?
To reset the low tire pressure indicator on a 2005 Lexus LS 430, first ensure that all tires are properly inflated to the recommended pressure. Then, turn on the ignition without starting the engine. Press and hold the tire pressure warning reset button, usually located beneath the steering column, for a few seconds until the indicator light blinks and then goes off. Finally, start the engine, and the indicator should remain off if the tire pressures are correct.
Resetting the light will do no good unless the problem is fixed as it will just come back on. Have the problem repaired by a professional and they will reset the light. This is not a DIY repair.
To reset the minor maintenance system on a 2002 Mercedes-Benz CLK 430, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within five seconds, and then turn the ignition off. When you restart the car, the maintenance reminder should be reset. If the reminder persists, repeat the process to ensure it has been properly reset.
how can i reset the service b message on the mercedes clk 430?