Turn key on, turn cruise on, then off, then on again. Hit resume button 5 times, holding it down the 5th time. Light should reset. If not, a dealer will have to do it.
The quickest way to reset a change oil light on a Durastar 4300 is to change the oil and replace the oil filter. If this is done and the light is still on, disconnect the battery for about 10 minutes and then reconnect it.
To reset the AC on a 2005 International 4300, start by turning off the vehicle and disconnecting the battery for about 15 minutes to reset the electronic systems. After reconnecting the battery, turn the ignition to the "on" position without starting the engine, then adjust the AC controls to the desired settings. If issues persist, check the AC fuse and consider consulting the owner's manual or a professional mechanic for further diagnostics.
2096 intk 4300
32 onces
As it is such a large item (International 4300 is a truck) they can be hard to come by. The best place to look is your local truck dealership or perhaps an online automotive dealer.
29 quarts
system failure
Just got the answer from Adams. Its 1.8 lbs.
Low coolant
set-back axle
The block heater plug on a 4300 International truck is located just behind the battery. A heavy duty outdoor cord will be necessary to plug the block heater into an electrical outlet.
The oil capacity for International 4300 dt466 from 1994 to current hold 30 quarts with filter. Those made before 1994 have smaller engines with the capacity to hold less oil.