Just turn the key to on (second) position - where you see all the lights come on the dashboard and wait till the brake wear indicator light go off.
If you replaced the tripped brake wear sensor, the light will go off in about 10-15 seconds...
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
Replace the brake pads.
get a OBD2 (On Board Diagnostics) reader and reset the code.
By replacing the front pads . they will reset automatically when the sensor sees the pads are ok.
Change the brake pads sensors. You must change them after every brake pad swap.
One can reset the brake warning light on the discovery 3 by resetting one's brake pads to the original manufacturer's settings and checking if they have been worn through.
Yes
You can reset the brake warning lights, on your VW Jetta, by backing up 20 feet and using the brakes. The automobile will sense the new pads and the warning light will go off.
When changing brake pads on a Mercedes Vito there is not reset option.Things to check:check that the sensors are the same as the ones on the old padsmake sure sensor wires properly connectedsensor CORRECTLY seated with the padsNote:Always check with your Mercedes Car Dealer
there is no reset on the brake pads, you can check your brake pads sensors they will make the light come on
HOW DO I RESET THE PAD WARNING LIGHT ON MY RANGE ROVER