* The key must be off. * Press and hold thetrip odometer button and turn the key to the Accessory position. * Keep the button pressed for about 5 more seconds until one of the following appear in the display: "Oil Service" or "Inspection". with "Reset" or "Re". * Press button again and hold for about 5 seconds until "Reset" or "Re" flashes. * the display will show the new intervalfollowed by "End SIA" for about 2 seconds.
The dealer has to reset it
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
When a 2001 Civic maintenance light is on the ECU is reporting that a specific service is needed on the vehicle. To reset the light the computer of the car needs to be flashed with a diagnostic tool.
In my experience with modern cars you don't. The mechanics set it and it will be reset when you take it in.
To reset the maintenance required light on a 2001 Honda Accord, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After the third press, the maintenance light should turn off. Turn the ignition off and then start the engine to ensure the light has reset.
Turn key to position 2 and hold select and reset together for 10 secounds
How do u put the spring back in for the Change cubby
To reset Maintenance light, switch key to on position, do not start. Press select and reset buttons at same time for about 15 to 20 seconds, then switch key off. If reset occured, the light will go off when you restart engine. If not, repeat process. Took three time for me.
How do reset the oil service light on a 2001 polo?
With the ignition switch off, press and hold the odometer reset button in, then turn the ignition switch to the on position but do not start the engine. After around 5 seconds the maintenance required light will go out.
HOLD down both the SELECT and RESET buttons on the right of instrument panels. Turn on the ignition and then after 10 seconds, release both SELECT and RESET buttons. It will turn the maintenance light off.
how to reset