Page 425 owners manual.set trip meter to A,turn off ignition,while holding trip meter turn on ignition,wait for 00000 on trip meter, done.
disconnect the battery
It means it's time to change your oil.
To reset the maintenance required light on a 2010 Toyota Tacoma, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine to ensure the light is reset. If the light remains on, repeat the steps.
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
maintenance with engine
To reset the maintenance light on a 2008 Toyota Tacoma, first turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the maintenance light should be reset. If it doesn't turn off, repeat the process.
On my 1996 tacoma I do not have a gas light for low gas.
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros or dashes begin to appear. Once that stops, your maintenance light will be reset.
What year ?
turn off the ignition. hold in the odometer reset button and turn on the ignition to on (Not start). Keep holding the button in for about 8 seconds and the millage will come back on. Light should be out.
When changing the wiring of any part of a car, a diagram will help make sure the wires are placed correctly. The wiring diagram to the taillights of a 2005 Toyota Tacoma can be found in its maintenance manual.
Yes