To reset the service engine light on a 1999 Oldsmobile Intrigue, you can use an OBD-II scanner to clear the trouble codes. Alternatively, you can disconnect the negative battery terminal for about 10-15 minutes, which will also reset the light. After reconnecting the battery, the light should turn off, but make sure to address any underlying issues that triggered it before doing so.
turn off engine, and start again
What does 'service engine soon' light mean on a 1998 olds intrigue?
The service engine soon light on an Oldsmobile Cutlass Supreme notifies the driver that it is time to change the oil. It is trigger around the 3,000 mile mark at regular intervals.
Have vehicle scanned to determine the problem and have codes cleared
check engine light
To reset the "Service Engine Soon" light on a 1992 Regency Oldsmobile, you can first disconnect the negative battery terminal for about 10 to 15 minutes. This will clear the engine codes and reset the light. Alternatively, if you have access to an OBD-I scanner, you can use it to read and clear the trouble codes, which will also turn off the light. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
hard fault code What is a hard fault code?
The service engine light is the same thing as a check engine light.
Yes, the Service Engine Soon light is the same as the Check Engine light.
reset service engine light
No
First get engine scanned with scan tool(service engine soon or malfunction indicator light is on dash) If no light or no codes present 90% on GM vehicles it is the crank sensor First get engine scanned with scan tool(service engine soon or malfunction indicator light is on dash) If no light or no codes present 90% on GM vehicles it is the crank sensor