0
To reset the service light on a 2004 Suzuki Grand Vitara, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, turn off the ignition and then start the vehicle; the service light should be reset. If the light remains on, you may need to repeat the process or consult the owner’s manual for additional troubleshooting.
What else can I help you with?
How do you replace the dome light on a suzuki grand vitara?
to replace dome light in suzuki grand vitara
Reset Service Engine Soon light on a suzuki grand vitara?
There are a couple of ways to reset the Service Engine Soon light on a Suzuki Grand Vitara. The easiest way is to get a scan tool from your local auto parts store. Using the scan tool will reset the service engine light. Disconnecting your vehicle's battery is another way that often works to reset the Service Engine Soon light.
Suzuki grand vitara how to change brake light bulbs 2007?
The license plate light bulb in a 2003 Suzuki Grand Vitara can be accessed and changed through the rear cargo area. A portion of the rear door panel will have to be removed. There is a small rectangle that can be popped out by using a screwdriver that is in the middle bottom of the door.
If a Suzuki Vitara has the catalytic light permanently what is it indicating?
Maybe your Cats worn out!
Where is the fusebox of a suzuki grand vitara?
Underneath drivers dash = black box right above dead pedal/rest. Horrible spot. how do i get to the tail light fuse in order to change it?
What does the power light on the suzuki grand vitara mean?
On the left side of the console is a button labeled power. When this button is pushed a power light comes on in dash. This button is used when you need more power such as climbing a steep grade.
How do you change a roof light bulb in Grand Vitara?
Use a big ladder.
How i change number plate bulbs on a suzuki grand vitara?
To change the number plate bulbs on a Suzuki Grand Vitara, first, open the rear hatch and locate the number plate light assembly. Carefully pry off the lens cover using a flathead screwdriver or a similar tool. Remove the old bulb by turning it counterclockwise, then replace it with a new bulb and reassemble the lens cover. Test the new bulb to ensure it’s working before closing the hatch.
How do you change the parking light on a 1999 Grand vitara?
To change the parking light on a 1999 Suzuki Grand Vitara, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws that hold the assembly in place and gently pull it out. Then, twist the parking light socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Make sure to test the new bulb before securing the headlight assembly completely.
How do you change the radio display light on a 2006 suzuki gran vitara?
To change the radio display light on a 2006 Suzuki Grand Vitara, you'll need to remove the radio from the dashboard. This typically involves taking off the trim panel surrounding the radio and unscrewing the mounting screws. Once the radio is accessible, you can replace the burnt-out bulb or LED by carefully removing it from the circuit board and installing a new one. Reassemble the radio and trim panel to complete the process.
How do you reset service engine soon light in a pontiac 2004 grand am se?
How to reset service light on a 2004 grand am
Why does the 2006 grand vitara engine light come on?
engine emissions not good .. get obd2 scan most probley your cat converter
