answersLogoWhite

0

  • Insert Key
  • Do not press clutch / brake
  • Press Start button
  • Wait until the Car / revelant Service symbol disappears on the Rev counter display
  • Immediately after the symbol goes out - Press and hold Both buttons on the Rev Counter
  • Continue to hold - the system will run a dash light check
  • Continue to hold
  • Display will then show VIN / Menu, - continue to hold through this until the time Reappears on the display.
  • Now release Only the Right hand Button (trip reset) for about a second, and then press and hold again (whilst still holding the LH button)
  • After another second or 2 the display will show the Front Brake Symbol You Are
  • Now in the Service Menu
  • Use the BC Button (on indicator stalk) to scroll through to the relevant symbol - eg Oil Reset or Rear Brakes
  • To Reset the warning indicator light - Press & Hold the BC Button at the revelant symbol until RESET appears - then press and hold again until the process is complete.
  • Turn Off and On the Ignition again - Warning should now have gone!
User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you reset 2008 Honda Element service light?

How do you reset 2008 honda element service light?


How do you reset the service light on 2008 vauxhall astra?

To reset the service light on a 2008 Vauxhall Astra, turn on the ignition without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back on to confirm that the service light has been reset. If the light remains on, repeat the process.


How do you reset service indicator on 2008 Mercedes 109cdi?

take a hammer to the light


How do you reset the service light in a 2008 scion xd?

To reset the service light in a 2008 Scion xD, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Start the engine to ensure the service light has been reset successfully. If the light remains on, repeat the process.


How do you reset service light on mercedez 2008 c350?

To reset the service light on a 2008 Mercedes C350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times and then turn the ignition off. When you turn the ignition back on, the service light should be reset. If it doesn't reset, you may need to repeat the process or consult the owner's manual for further instructions.


How do you reset the service light on 180 c kompressor 2008?

To reset the service light on a 2008 Mercedes-Benz C180 Kompressor, first, turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and start the engine to ensure the service light has been reset. If the light remains on, repeat the process.


How do you reset the service light on a 2008 Vauxhall Astra?

To reset the service light on a 2008 Vauxhall Astra, first turn the ignition key to the "On" position without starting the engine. Press and hold the trip button on the instrument cluster, then turn the ignition off and back to "On" while still holding the trip button. Keep holding the button until the service light resets and disappears. Release the button, and the service light should now be reset.


How do you reset the oil service light on 2008 BMW X-5?

To reset the oil service light on a 2008 BMW X5, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition and start the engine to check if the oil service light has been reset. If it remains on, repeat the process.


How do you reset service lights in my seat Alhambra 2008 diesel?

To reset the service light in a 2008 Seat Alhambra diesel, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to check if the service light has been reset. If it remains on, repeat the process.


How do you Reset service light on a fiat bravo 2008?

To reset the service light on a 2008 Fiat Bravo, first, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds, and then turn the ignition off. When you start the engine again, the service light should be reset. If the light persists, consult the owner's manual for further instructions or verify if additional maintenance is required.


How do you reset the tire pressure warning light on a 2008 dodge Caliber?

The light will reset itself if the system is working properly and the tires are at the correct pressure. If the pressure is correct and the light is still on, you need to take it in for service.


How do you reset engine light in 2008 buick lucerne?

how do you reset check engine light in 2008 buick lucerne