0
Take out the spark plugs and turn engine over till the timing mark is tdc in the sight glass. The sight glass is behind the generator cover which can be removed with a phillips head screwdriver. One of the pistons should be at the top when you do this, it will be the one you check first for valve clearance. Valve clearance on older models will be 10mm for intake, 15 mm for exhaust. After you set that piston roll the engine over till the other piston is at top dead center, the timing mark should be on the arrow as well. Now set the valve clearance for that cylinder. After you do this roll the engine over a couple of times and recheck valve clearance on both cylinders to make sure you got it right. That's it! There is no way to set timing on an engine that I know of other than moving the timing chain on the gears.
What else can I help you with?
How do you set cam timing on a 4.6 SOHC?
The cam timing on a 4.6 SOHC engine is set by aligning the timing marks of the timing chain to the cam sprocket. This sets the initial timing based on factory settings.
How do you set the timing on a 998cc leyland mini?
what timing are you trying to set? the cam timing or the ignition timing?
How do you set cam timing on a fiat strada 1.2 8v?
How do you set cam timing an a Fiat Strada 12. 8v
How do you set up cam timing on a Mazda 626 2.2L engine?
How do you set cam timing of a mazda 626 l 1.8?
Timing marks on a single cam neon?
how to set the timing marks on a single cam dodge neon
How do you set cam timing on a Yamaha big bear 350 4x4?
You set cam timing on a Yamaha big bear 350 4x4, by opening up the bike chassis and looking for the cam timing levers. You can adjust it up or down until you have it set to how you want it.
How do yoy set the cam timing on a Kia Rio 1.6?
how to set timing on a 2006 kia 1.6
How do you set the engine timing on a Windstar?
You cannot set the timing as it is all under computer control.The timing is controlled by the computer. Cannot check timing. Suspect timing is off, cam sensor, crank sensor, worn timing chain, bad pcm.
How do you set the timing on a 1997 Chevy 5.7L engine?
you cant set "timing" you have to have a scanner to set cam sensor to 0 +or-2
How to set timing on 1996 Toyota Tercel?
you cannot adjust the ignition timing on this car. a manual will help if you need to set cam timing
How do you set s fiat strada adventure cam timing?
How do I set cambelt timing on fiat strada 1.6 elx?
How do you set the cam timing on a Honda xr80?
Point the intake cam lobe down and the timing mark on the cam gear at the 12 o clock position with the piston at TDC.
