It is located under the car close to the gas tank
Listed under the hood on a placard and in your owner's manual. .060 is the gap on a 2.4 liter
I am trying to do this myself,any suggestions ========== Do not turn transmission! I myself, 8/29/09
The timing marks on a '97 Dodge Stratus are located on the timing chain and the camshaft sprocket. They must be aligned to set the initial timing.
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
That requires an OBD2 engine scanner to set the timing. The timing is electronic controlled. You can NOT use a timing light it won't work.
That requires an engine scanner to set the timing on that engine. The timing is computer controled.
You do not have the correct timing set for that car.
What are timing marks for 97 tacoma 2.4
The distributor is set to 0 deg with a scan tool. It can not be done with a timing light.
Perhaps transmission fluid is "breaking down" at high temp. Try changing fluid and filter
replacing achieva serpentine on a 96i have a 96 and you have to completely remove the motor mount and all of the bolts holding it on the engine to replace the belt,also carefully jack up the engine since it will fall on the ground if you take off the mount