answersLogoWhite

0

I am guessing that you have a bad turn signal relay. Locate it by sound and replace it.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you fix tritton 720 buzzing noise when using xbox 360 wired controller on xbox?

You either buy a new xbox or a new controller.


Buzzing noise from light fixture?

A buzzing noise from a standard incandescent lighting fixture can be caused by a short in the lighting circuit (which is dangerous), or in some cases it can happen using a rheostat that is not all the way on or all the way off. The larger the physical size (not necessarily wattage) of the filament, the more likely it is to buzz using a dimmer -- these bulbs are designed for 120 volts, and using a rheostat gives less voltage to the lamp.A tube fluorescent fixture can make a buzzing noise if the ballast (small electrical box inside the fixture) is beginning to fail.Some outdoor fixtures are inherently noisy, such as a sodium arc lamp. In this case, there is really nothing to be done about it.


What is the technical term for blowing a trombone?

'buzzing' using your 'embouchure'


Which bat makes a'metallic buzz 'sound?

The Brazilian Free-tailed bat is known for its unique metallic buzzing sound produced using its echolocation system as it hunts for insects in flight. This sound is created by the rapid frequency of the bat's echolocation calls, which can sometimes be heard by humans as a buzzing noise.


When you Talk on CSS your Plantronics Gamecom headset only makes a buzzing noise?

According to the instructions on the CSS for the game Counter Strike Force, it says that you should have a sound card with a headset. You don't say which headset you are using. If you are using a wireless one it may be picking up interference, which could cause buzzing. If you are using one that has a sound card then it may have a loose connection when plugged in. Damage to cords and connections are a common liability when it has been used fairly often. If a cord has a loose connection in the wiring somewhere it can cause the buzzing in your ears. If this is still under warranty you will want to get it replaced.


What is buzzers?

A buzzer is any mechanical, electromechanical, electronic, etc. device designed to produce a buzzing sound or vibration when activated. Some examples are:joy buzzer, a mechanical device used for practical jokes that is held in the palm and activated when the jokester shakes hands, causing an unpleasant vibration in the palm of the victim (shown in image above)electric buzzer, an electromechanical device that produces a buzzing noise and activated by connecting to electrical powerpiezo buzzer, an electronic device using the vibrations of a flat disk of piezoelectric material to produce a buzzing noise and activated by enabling it controlling electronic circuit


Members of a species can recognize mates using?

signals


Tongue twister using the word buzz?

An easy one Busy Buzzing Bumblebees


What is beamforming in passive sonar?

Beamforming in passive sonar involves processing signals from multiple hydrophones to determine the direction of arrival of sound waves from a target. By combining the signals in a way that enhances the desired signal while suppressing noise and interference, beamforming helps to localize and track underwater objects using only the received acoustic signals.


How would you eliminate the high frequency noise in integrator?

To eliminate high frequency noise in an integrator, you can use a low-pass filter at the input of the integrator to block high frequency signals. You can also increase the integration time constant to filter out high frequency noise. Additionally, using a precision op-amp with good common-mode rejection can help reduce noise in the integrator circuit.


How are analog signals received?

Analog signals can be received using an analog receiver.


Why do basketball officials use hand signals?

Hand signals are used by referee's to relay the information of what foul took place to the stat officials sitting at the scorer's table. Using hand signals, the referee's do not need to walk over to the table and tell exactly what foul occurred, instead they use hand signals to describe the foul and which player committed the foul.