0
How do you take a rotor off a 1999 Daewoo is it the center nut or the screw on the rotor?
The center nut is for the hub assembly. You need to remove the screws on the rotor. The screws might be stuck to the rotor when you try to take it out. If this is the case, be careful when you use the screwdriver. You might round out the screw head. When the screw is hard to remove, I usually use a 1/4" socket wrench, 1/4" socket, and screwdriver bit. The screwdriver bit will fit inside the 1/4" socket. This gives you extra torque and won't round out the screw as a screwdriver might do. Once the screws are out, the rotor should come right off.
What else can I help you with?
Where is the ecu on a Daewoo matiz 1999?
where is the ECU on Daewoo Matiz 1999
When did Daewoo end?
Daewoo ended in 1999.
When was Daewoo Express created?
Daewoo Express was created in 1999.
Where can you find a dashboard for a 1999 Daewoo?
You can look on ebay.com and type in the search box "1999 Daewoo" Also check your local junkyard for wrecked or junked Daewoo cars...the last option you can do is buy a new one from a retail reseller of Daewoo parts
What is the size of the rear speakers in Daewoo Lanos 1999?
What is the size of the rear speakers on daewoo lanos
How to remove rear brake rotor on 1999 Chevy blazer?
If they are rotors then you will take the caliper off of the bracket via 2 bolts usually then remove the bracket from the spindle via 2 bolts and the rotor should come right off. However some vehicles have a screw on the bolt hole face of the rotor and if you have one you'll need to remove it. It's usually a Phillips, just get a screw driver large enough to fit it and use a hammer to tap the end of the screw driver to loosen it up. With a hammer hit the non rotor surface around the inner circumference, then tap the rotor from the back access hole. Spraying the "hub" where it contacts the rotor with WD40 will help to loosen the rotor up as well. Hope this helps good luck!
How do you remove the front rotor on 1999 RX300?
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
How do you remove the front disk brake rotor off of a 1999 grand vitara so that the rotor can be turned before putting on brake pads?
you remove the brake caliper and the caliper bridge use two 8mm by 125pitch bolts and screw them into the holes until rotor comes free It also works on a 2000 Thanks!
What is the firing order for a 1999 Daewoo leganza?
1342
How much does your 1999 Daewoo Leganza weigh in tons?
A person should know the weight of their vehicle. The 1999 Daewoo Leganza weigh 0.0015 tons in its curb weight.
How do you change the Timing Belt in a 1999 Daewoo Laganza?
look at how to set timing mark for 99 daewoo,explained it there
Which way does a distributor turn on a Daewoo Lanos 1999 model 1.5L?
I have 1999 lanos and it is a distributor-less model.
