read manual
You take your foot off the brake pedal.
TAKE YOUR FOOT OFF THE BRAKE!!! If your brake fluid is low the brake light will be on, there is a float inside the brake fluid reservoir, after you fill it up, if the light is still on take the cap bake off of the reservoir and make sure that the float is floating, if it isn't wiggle it around with your finger and it should pop to the top.
The light assy has to come off and there a couple of screws you get to from inside to remove the light.
The brake light bulbs ar removed from the rear of the light assy . Take it off of the body.
you have to take off the panel that is covering around the brake and then you will see the brake light switch on the front side of the brake you can just simply turn it left or right and that will adjust it
When you open the hatch back there are two screws, take that off and then pop off the light cover and it is there.
It should go on when the brake is on and off when you release the brake.
There are several reasons why the dashboard brake light won't go off on a 2000 Mercedes ML430. One reason could be a short in the wiring system. If your light is off you should take your car into a mechanic to have them look at it.
take panels on the inside of the trunk off and they should be right behind the taillights 3rd brake light is on the bottom of the back dash
Try adding brake fluid to the reservior for a simple fix (take off neg. battery terminal to void light). If not that, could be brake pad is low or sensor issue.
you ask it to stop
If it's the brake light in the boot lid then you have to take the cover off the inside of the boot lid and then you will have access to the light bulbs. If it's the brake light in the rear quarter panel then you open boot lid and unscrew the two bolts holding the light cluster and slide it backwards, then you will have access to the bulbs