To remove the heater box from a C220, start by disconnecting the battery and removing the dashboard for better access. Then, detach the HVAC control panel and any associated wiring harnesses. Next, unbolt the heater box from its mounting points and carefully pull it out, ensuring to remove any hoses connected to it. Remember to check for any additional components that may need to be removed to facilitate the process.
Where is heater blower motor on 1996 Benz C220 located?
take heater hoses off the firewall heater box and unbolt heater box on the firewall and then pull heater box down from under the dash and you will see the heater core inside, replace it in the box and bolt everything back together.
In a 2002 Mercedes C220, the heater core is located inside the dashboard, typically accessed by removing the dashboard and related components. The heater controls are connected to the climate control system, which regulates airflow and temperature. For direct access to the heater core or any repairs, it’s recommended to consult the vehicle’s service manual or a professional mechanic.
take out the glove box
take out your glove box an its right there
it's in the heater box under the glove box.simply disconnect the hoses under the hood,and take the heater box out from under the dash get a new core and install
You need to remove instrument cluster. And the whole dash to access heater box. The heater box case has to be slpit in half to access heater core. A very timely and frustrating job. Take to a professional is what I recommend.
take out the glove box and 4 screws that hold the cover around the heater core and take off the 2 heater hoses under the hood
Take hoses off under the hood that go to the heater box, unbolt all the bolts on outside of heater housing and pull the housing off to get to the heater core. you have to take out the inside wheel well
its fuse number 53 in the fuse box under the bonnet
hello this is what you have to do you have to take the dash all the way out of your truck and take the heater box out and then put it all back to together
you have to take the dash easyout to get to the heater core box . Its a two man job and is not easy.