0
Looking into the engine compartment from the passenger side you you will see two large bolts and a smaller bolt on the alternator. The large upper bolt is the pivot bolt, the lower bolt is the locking bolt. The third bolt is used to adjust belt tension.
1. Loosen the alternator locking bolt. You may need a breaker bar to free the bolt.
2. Loosen the pivot bolt.
3. Turn the tension bolt counter clockwise to loosen tension, clockwise to increase tension.
4. Tighten the pivot bolt and locking bolt.
What else can I help you with?
How do you replace alternator belt on a 94 geo prizm?
To replace the alternator belt on a 1994 Geo Prizm, first, disconnect the negative battery terminal for safety. Then, locate the alternator and loosen the adjustment bolt and the tensioner bolt to relieve tension on the belt. Remove the old belt and install the new one, ensuring it follows the correct routing. Finally, adjust the tension on the new belt and tighten the bolts before reconnecting the battery terminal.
Easiest way to replace alternator belt on a 1994 Toyota 4x4?
Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.
Does a 1994 Geo Prizm have a timing belt or a timing chain?
1994 Geo Prizm has a timing belt.
How do you tighten alternator belt for 1996 accord?
There is a tensioner bolt that is connected to the alternator. You have to screw in the bolt, which will pull the alternator out and tighten the belt.
How do you lift the Alternator and tighten when the belt is already on a 2001 Taurus?
Serpentine belt? You may have to remove to tighten alternator
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
How do you tighten the alternator belt on a 240sx?
To tighten the alternator best on a 240sx, loosen the bolt on the alternator on the drivers side. Pull on the alternator away from the engine to adjust the belt. When it has no more than a quarter inch of give, tighten the bolt to finish.
How would you route the alternator belt for a 1987 325 BMW?
how do u tighten up an alternator belt on a 1987 BMW 325i?Answerhow do u tighten up an alternator belt on a 1987 BMW 325i?
How do you tighten the alternator belt on a 1994 Dodge Ram 350 van?
First and foremost, make sure you have a diagram before removing the old belt. If there isn
How do you replace an alternator on a 1994 Nissan truck?
on yours, you will have to remove the bottom shield and work from the bottom of truck.Remove wires from alternator,remove pivotalbolts and remove alternator and replace and tighten belt back.
How do you tighten a belt on a 1988 Dodge Colt?
depending on the style of belt, on the alternator belt there is an adjustment just below the slider holding the alternator, you just simply tighten it until belt becomes tight.
How do you tension a belt?
if the car doesn't have an automatic tensioner than if the belt is around the alternator pully you loosen the bolt holding the alternator on and move the alternator to tighten the belt.
