Get your engine checked
It is important to pay attention to the warning lights in a car. The Service engine light means something is wrong with the engine and once it is taken care of, it will turn off on its own.
Depends on which engine warning light you are referring to. If you are taking about the Check Engine light, then you must have the problem fixed that caused the light to come on. It is an emissions problem and you need to seek the help of a professional.
Depends on which engine warning light you are referring to. If you are referring to the Check Engine light then have the problem repaired that caused it to come on in the first place. They will reset the light. Resetting the light without repairing the problem and it will just come back on.
It the engine management warning light is on it is best to find out what the problem is and fix it. Many auto parts stores have a reader and call tell what is wrong for free.
Be more specific! Warning light or check engine. If, warning light. What function?
To clear the anti-theft warning light on a Pontiac Sunfire, first, ensure that your vehicle is in the "On" position without starting the engine. Insert the key into the ignition and turn it to the "On" position for about 10 minutes until the light turns off. After that, turn the ignition off and then start the engine to see if the light remains off. If the warning persists, consult the vehicle's owner manual or a professional mechanic for further assistance.
no it does not
You can turn off the 2009 Toyota Camry seatbelt warning light by engaging the seatbelt. You can also remove the seatbelt warning light fuse. Removing the seatbelt warning light fuse is not recommended.
To reset a Vectra warning light, first ensure the underlying issue is resolved. Then, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds, then turn the ignition off. Restart the engine to check if the warning light has cleared. If the light remains, further diagnostics may be needed.
Depends on which warning light you are referring to. Oil pressure, temperture, charging system, SRS (air bags), check engine, maintenance required, etc.
You probably need new rear disc bearings. Once you install the new bearings, the warning light should turn off.
A person can turn off the emissions warning light by fixing the issue that caused it to go off. They can also use an OBD scanner to remove the codes causing the light to go off.Ê