The switch for the rear wiper will be on the dash, to the left of the steering wheel.
Turn the headlights on and pull the end of the switch out.
If the rear wiper on a 2001 Isuzu Rodeo will not turn off it could mean that the rear wiper switch is broken. The cost to replace the switch averages around $200 if done by a professional mechanic.
how do i turn off rear wiper for my Montana van
To turn off the rear wiper on a 2004 BMW X5, locate the wiper control stalk on the right side of the steering wheel. Rotate the stalk to the "OFF" position. If the wiper is set to intermittent or continuous, simply turning it to the "OFF" position will stop the rear wiper. Ensure that the front wipers are also off, as some settings may influence the rear wiper's operation.
Turn clockwise to tighten.Turn clockwise to tighten.
You turn it counter clockwise.
On a 2003 Lincoln Navigator : To turn on your rear windshield wiper , on your turn signal lever closer to the steering wheel is : - INT 2 - INT 1 - OFF
In the 2003 Jeep Liberty, the rear wiper switch is located on the end of the windshield wiper control stalk on the right side of the steering column. To operate the rear wiper, turn the stalk to the rear wiper position. For intermittent use, you can pull the stalk towards you to activate the rear washer. Remember to ensure the rear wiper is in the "on" position for continuous operation.
Hen
To shut off the rear wiper on a 2003 GMC Envoy XL, locate the rear wiper control switch on the turn signal stalk or the dashboard. Turn the switch to the "Off" position, or if it has multiple settings, cycle through the options until the wiper stops. If the wiper continues to operate, check for a malfunction in the wiper motor or the switch itself.
To turn on the rear windshield wiper on a 2007 Jeep Grand Cherokee, locate the wiper control stalk on the right side of the steering column. Pull the stalk toward you to activate the rear wiper. You can also twist the end of the stalk to control the wiper speed or to activate the washer function. Make sure the vehicle is in the "ON" position for the wiper to operate.