To turn off the seat belt chime on a 2008 Toyota Tundra, you can follow these steps: Sit in the driver's seat with the door closed and turn the ignition to the "on" position without starting the engine. Buckle and unbuckle the seat belt three times, then turn the ignition off. This should disable the chime for that seat. If you want to re-enable it, repeat the process.
put your seat belt on
Here is a couple of links to check out! One is a mechanical fix and the other is, well you decide :) http://www.tundrasolutions.com/forums/tundra/107489-diy-how-to-disable-seatbelt-chime/ http://www.tundrasolutions.com/forums/tundra/135468-diy-contest-seatbelt-chime-light-gone/
By wearing your seat belt.
Buckle up your seat belt and the chime will go off.
Buckle up!
Buckle up your seat belt and the chime will go off.
To disable the seat belt chime on a 2008 Corolla S, first, buckle the driver's seat belt and then turn the ignition key to the "On" position without starting the engine. Press the seat belt latch and unbuckle it three times within 10 seconds. The chime should then stop, indicating that the feature has been disabled. If you want to re-enable it, you can repeat the process.
Put your seat belt on:)
Put on your seat belt and buckle it up. The chime will then stop.
Once you put your seat belt on and buckle it the chime will go off. If it does not then take the car to the dealer for warranty repair.
Wear your seat belt
Look in you owners manual for enhanced warning system. The instructions are there. Other than that, wear your seat belt, it is the law.