To turn off a single dashboard light in your vehicle, first, identify the specific light that needs to be turned off. Often, these lights indicate issues that require attention, so consult the vehicle's manual for guidance on addressing the underlying problem. If it's a non-critical light, such as a reminder or indicator, you can usually reset it by turning off the ignition, removing the key, and then restarting the vehicle. If the light remains on after addressing the issue or resetting, it may require professional attention.
punch it out
turn the little black knob to the right of the brake light on your dash clockwise
check your fuses or re-connect the airbag
you reset your car. It should be in the trunk.
usually means you have a turn signal bulb in the front or rear burnt out.
To turn off the ABS light (without diagnosing and fixing the problem)Solution 1Remove the bulb from the dash board (requires pulling dash board out). Solution 2Unplug the sensor from the side of the brake fluid reservoir under the hood.
on the dash board
it starts but the oil light stay on
The system can not be disabled.
On my Subaru Forester the instrument panel lamps are dimmed by turning a ring on the turn signal stalk.
Usually when your battery light will not turn off, you either are about to have generator problems, you have a bad controller, or you have a bad sensor. You need to have someone check it out.
I have no idea. Did you ever solve this? My dash board lights became very dim whenever I had the headlights on and my battery light kicked on occasionally. I thought it was the alternator so I just replaced it. The battery light issue is solved but the dash light brightness is still extremely low whenever I turn the headlights on.