Hi, what you need to do is first of all buy a cigarette lighter from a car store (just get one of those universal ones) or go to a scarp yard and get one from there, then all you have to do is wire it straight up to your battery! run the cables behind the dash then under your bonet. make sure you secure all the cables so the dont get caught up or melt and short on you engine! If your going to do it that way rather than to wire it into the loom be sure to put an inline fuse in or you'll probalby end up melting the wire!!!
yes y not you can add a new one just wire it to the bat and fuse it
When your cigarette lighter fuse is good and there is voltage measured between the fuse's load side to ground (To check this, use a dc voltmeter or a 12v automotive lamp and an automotive lamp socket. Connect one wire to the fuse and the other wire to the chassis of the vehicle the lamp should glow if voltage is present on the fuse terminal.), check the wire between the fuse and cigarette lighter. This wire should be without cut and when the wire is good then check the connector on the cigarette lighter socket for loose connection or corrosion. One more thing is that, make sure that your cigarette lighter fits the cigarette lighter socket because not all cigarette lighters will work on some cigarette lighter sockets.
Dont smoke
To rewire the cigarette lighter in a 2000 Ford Escort, first, remove the lighter assembly from the dashboard. Inspect the wiring harness for any loose or damaged wires, and connect the positive wire (usually red) to the lighter terminal and the negative wire (usually black) to the ground terminal. If needed, use a multimeter to confirm proper connections. Finally, secure everything in place and test the lighter to ensure it functions correctly.
Smoking is bad for your health. Convert the outlet to adapt it to a CD or MP3 player. These will not kill you.
check the fuse or the ground wire.
If the cigarette lighter is not working and the ACC fuse, inside the car, left of steering wheel, is still good (radio is working), the "fuse" on the back side of the cigarette lighter socket, a brown wire, has blown. Socket needs to be replaced or fixed with a soldering iron and a new wire.
You hooked the ground wire to you amp to a hot wire. The hot wire is black and it's the hot wire to the cigarette lighter. I used to be a Ford mechanic and saw this alot and charged people lots of money to fix their Stupid mistake.
To wire a 12-volt cigarette lighter plug to a backup camera LCD monitor, first ensure the monitor is powered off. Strip the ends of the wires from the monitor and the cigarette lighter plug. Connect the positive wire (usually red) from the monitor to the positive terminal of the cigarette lighter plug, and the negative wire (usually black) to the negative terminal. Secure the connections with heat shrink tubing or electrical tape, ensuring no wires are exposed, and then plug it into a 12-volt socket to test the setup.
the color of the positive wire should be a bright red color.
Take the old one out and wire the new one the sam way.
Did you ever find out where the cigarette lighter fuse was located on the 98 Camry? I have a 00 Camry and im looking for my cig. lighter fuse. The fuse is in a fuse box located under the drivers side of the dashboard to the left of the steering column. If the fuse is good and the cigarette lighter still does not work, the wire attaching at the cigarette lighter itself has probably burned or broken off necessitating the lighter be changed. It's a comon problem.