answersLogoWhite

0

Usually when the cylinder head gasket is blown (broken or damaged). It cannot be repaired but has to be replaced with a new head gasket.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

When was The Water Engine created?

The Water Engine was created in 1992.


Bmw 318 i water in engine what happens?

The water in the engine of MMW I helps cool the engine of the vehicle.


What is the purpose of water in a car's radiator?

The radiator cools the water which then goes to your engine to cool it off, as cool water enters your engine hot water from the engine enters your radiator


On what side of the engine is the water pump on?

The water pump is usually on the front of the engine.


Can you wash your car engine with water?

Yes, you can wash your car engine with water.


Water is used to cool the radient of hot car engine?

Yes, water cools your engine. A water pump draws water from the radiator and into pores in the engine block, cooling it off. There is a thermostat that lets the hot water out of he engine at a certain temperature so the hot water cools off in the radiator with wind and the cold water goes in the engine.


How much water does it take to ruin an enging?

There is no set amount of water that will ruin an engine as it depends on various factors such as how quickly the water enters the engine, the type of engine, and how the engine is operated after exposure to water. However, as a general rule, significant water intake into the engine can lead to hydrolock or corrosion, resulting in engine damage. It is best to avoid water entering the engine altogether to prevent any potential damage.


Where is the water pump for 3sfe engine?

The water pump for a 3sfe engine is on the back and bottom of the engine. It is on the passenger side of the car.


Is the engine that runs on water safe for the environment?

There is no engine that runs on water as its energy source.


How does a water cooled engine works?

A Liquid Cooling engine works by using Water and Ani Freeze to travel from the resevwar to the engine via a Water Pump, and it travels through water jackets that cool the engine down. when that water gets to hot the Thermostart opens to let water out from the engine through the return pipe and goes through the radiator fins to cool the Hot water down, then goes back into the engine to cool again.


Will water crack a engine block?

Yes. You can freeze the water, making it expand, or you can add cold water to a hot engine, shocking the block. You prevent freezing with antifreeze. You prevent shock by never adding water to a hot engine. If there is enough water in the engine to have the water pump provide circulation, you can add water SLOWLY, but you should really only add water to a hot engine when there is very little to add.


What happens when the water pump does not transport the water to the engine?

The engine will overheat quickly and catastrophic damage can occur if you continue to run the engine.