On a McCulloch chainsaw model 600032-07, the fuel lines typically run from the fuel tank to the carburetor. One line, often referred to as the fuel pickup line, draws fuel from the tank, while the other line returns excess fuel back to the tank or serves as a vent. It's essential to ensure that these lines are properly connected and free of kinks or blockages to maintain optimal fuel flow for the chainsaw's operation. Always refer to the manufacturer's manual for specific routing details and diagrams.
If you will type, "Mcculloch MS40A Parts" in a search engine you will find many online sources for parts for this saw.
Ask at your local lawnmower store.
Yes, It is a Mcculloch Pro Mac 610, Lots of parts available!
The proper mixture is 40:1 or 3.2 oz oil to 1 US Gallon of gas.
The McCulloch Model 60013414 Timber Bear was produced in 1991. This model is part of McCulloch's line of chainsaws, designed for both professional and residential use. It is known for its durability and efficiency in cutting tasks.
I have model number 60003816 and I run 3oz of oil to 1 galion of gas. Works good but I'm not positive that's what is recommended. The manual for that chainsaw requires a 20:1 mixture of non-McCulloch two-cycle oil. That is 6.4 oz. per gallon of unleaded gasoline regardless of what it says on the oil container.
Use a 7/32" file. Maintain the current degree angle and be sure to also flat file your rakers. A file guide would probably help you qutie a bit. http://store.chainsawr.com/
will not fire up
To correctly route the fuel lines on a McCulloch 3200 series chainsaw, ensure the line from the fuel tank goes to the carburetor's inlet. The larger line typically goes from the tank to the carburetor, while the smaller line connects the carburetor to the fuel tank vent. Additionally, make sure the fuel filter is submerged in the fuel tank. Always consult the specific model's manual for detailed diagrams and instructions.
Yes, you can typically download an instruction manual for a McCulloch 335 Chainsaw from the official McCulloch website or other online resources that archive user manuals. Look for a "Support" or "Manuals" section on the website, or use a search engine by entering the model number along with "instruction manual." If you can't find it online, consider contacting McCulloch customer service for assistance.
The model number for a McCulloch Eager Beaver chainsaw is typically located on the recoil starter cover or the side of the engine housing. It may also be found on a metal plate or sticker affixed to the body of the chainsaw. If you're having trouble finding it, check the user manual for specific guidance on its location.
What year model is this Harley or make. The oil in the primary is self contained. It's a 1982 FLHT shovelhead that shares engine oil for the primary chain. I'm removing the chain and replacing it with a belt so I need to block the lines off somehow