0
How long will it take before the anabond 230 is cured what is the procedure the procedure?
Anabond 230 is a Nitrile Phenolic High temperature cure adhesive. A-230 should be applied on the clean surface of the metal break shoe and the rubber/asbestos reinforced pads with the help of a brush. thereafter the liner and the shoe to be cured at 80 degrees C for about 30 minutes, to remove the solvent present as a carrier for the adhesive. Now A-230 will be slightly tacky on the surface. Clamp the shoe and the liner together with the help of suitable metallic clamps and place the clamped parts in an air drying oven set to a temperature of 150 - 170 degrees for about an hour. Remove the clamped parts carefully and room temperature cool. Remove the clamp and the bonded brake shoe is ready for use. Clean mechanically excess adhesive found on the side of the bond line....
What else can I help you with?
How long can your fish last before and after treatment for ick?
once treated and cured a fish can live a normal life span
How long can you keep a sealed cured ham in the fridge?
Not long. i wouldn't try to keep a cured ham very long, just to be safe
How long should grout dry before sealing it?
Grout should dry for at least 48 hours before sealing it to ensure it is fully cured and ready for the sealing process.
How long do you need to wait before you can paint treated wood?
You should typically wait at least 6 months before painting treated wood to ensure it has fully dried and cured.
How long does polyurethane need to dry before it is fully cured?
Polyurethane typically needs 24-48 hours to dry completely and cure fully.
Is breast cancer be cured?
yes it can as long as you haven't left it to long
A word for 'long complicated procedure'?
A word for a long complicated procedure is: 'Rigmarole' CCo A word for a long complicated procedure is: 'Rigmarole' CCo
How long does it take for a anorexic to get cured?
It depends on the person and the type of treatment that they have received. and also the person has to deal with different issues before they cansee any improvements
How long should I let caulk dry before using the area?
You should typically let caulk dry for about 24 hours before using the area to ensure it has fully cured and is ready for use.
How long after sealing grout can you shower?
You should wait at least 24 to 48 hours after sealing grout before showering to ensure it has fully cured and is water-resistant.
How long does the pallidotomy procedure take?
The procedure requires several hours.
How long does a d and c procedure take?
A dilation and curettage (D&C) procedure typically takes about 10 to 30 minutes to perform. However, the total time spent at the medical facility may be longer due to pre-procedure preparations and post-procedure recovery. Patients are usually advised to rest for a short period after the procedure before going home.
