0
A gallon of biodiesel contains approximately 120,000 to 130,000 British thermal units (BTUs). The exact BTU content can vary slightly depending on the specific composition and feedstock used to produce the biodiesel. Generally, biodiesel has a lower energy content compared to traditional diesel fuel.
What else can I help you with?
How many BTUs per gallon of petrol?
About 114,000 BTU per US gallon.
How many btu's in one liter of biodiesel?
One liter of biodiesel contains approximately 37,000 to 39,000 British thermal units (BTUs). This value can vary slightly based on the specific composition of the biodiesel and its source materials. Generally, biodiesel has a slightly lower energy content compared to petroleum diesel.
How many BTU's per gallon of kerosine?
One gallon of kerosene will produce 134,000 BTUs of energy when burned.
How many Btu's are in a gallon of fuel oil compared to a gallon of propane?
A gallon of fuel oil typically contains about 138,500 BTUs, while a gallon of propane provides approximately 91,500 BTUs. This means that fuel oil has a higher energy content per gallon compared to propane. Therefore, when considering energy output, fuel oil is more efficient in terms of BTUs per gallon.
How much biodiesel from a gallon of soy oil?
Approximately 1 gallon of soy oil can produce about 1 gallon of biodiesel. The production process involves converting the oil through a chemical reaction called transesterification to create biodiesel.
How many btu's in one liter of bio-diesel?
One liter of biodiesel contains approximately 8,000 to 9,500 British thermal units (BTUs), depending on its specific composition and quality. Generally, biodiesel has a lower energy content compared to petroleum diesel, which averages around 10,000 to 11,500 BTUs per liter. The exact BTU value can vary based on the feedstock used to produce the biodiesel.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
How much does a plant sell biodiesel for?
Do you mean How much does a biodiesel plant cost? and that is $1.57 per gallon
How many BTU of energy in one gallon of liquid petroleum gas?
How many Btus if 1 cubic foot of Liquid Petroleum
How much does biodiesel weigh?
Biodiesel has a density 0.88 grams per cubic centimeter. This converts to about 7.34 pounds per gallon.
How many BTUs are in a gallon of propane?
Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.
How long will a gallon of Kerosene burn at 30000 btu hours?
A gallon of kerosene typically contains about 135,000 BTUs of energy. At a burn rate of 30,000 BTUs per hour, a gallon of kerosene would last approximately 4.5 hours (135,000 BTUs ÷ 30,000 BTUs/hour = 4.5 hours). However, actual burn time can vary based on factors such as efficiency and burner design.
