6 quarts
3.5 quarts
454 US quarts are roughly 429.64 liters.1 liter ~ 1.05669 US quarts1 US quart ~ 0.946353 liters
The 86 454 engine, a part of Chevrolet's big block V8 family, typically holds about 7 quarts of oil when using a standard oil filter. If an aftermarket filter is used, the total capacity might increase slightly, but 7 quarts is the general guideline. Always consult the owner's manual for specific information regarding oil capacity for your particular engine.
I have a 1989 Southwind made by Fleetwood with a 454 Chevy engine and according to all my information I have in the books is that it takes 6 quarts without filter and 7 quarts with a filter. Sometimes someone may have put in the wrong dip stick and it won't read correctly. But that is what the owners manual says in mine. Mikey
A 1970 Chevrolet Chevelle with a 454 engine typically requires about 5 quarts of oil when including the oil filter. It's always a good practice to check the owner's manual for specific recommendations and to verify the exact amount, as it can vary slightly based on the engine's configuration and any additional modifications.
divide 454 by 61 and you get 7.4 liter
454 cubic inches is 7.4 (7.43973) liters.
I have a 1988 Chevy 454 that takes 8 quarts. 5 or 6 quarts with filter change depending on what vehicle it was installed in. Park the vehicle on a level surface. Drain the oil and change the filter. Add 5 quarts of oil and start the engine. Run for 45 seconds and shut down. Wait 45 minutes and check the level. Add as necessary. You now know.
There is such a thing as a 454 truck engine, also 454 passenger car engine.
http://www.454rider.com/ 3.6Q
7.4 L