Check the owners manual or visit a shop/dealership.
Drain and refill .......4.0 quarts Dry .........................8.8-10.0 quarts Dexron III or Mercon fluid
The 1998 Mercury Villager typically requires about 9.5 quarts of transmission fluid when performing a complete fluid change, including the torque converter. If you're just draining and refilling the transmission pan, it usually takes around 5 to 6 quarts. Always consult the owner's manual or a repair guide for the most accurate information specific to your vehicle.
The Mercury Villager typically requires about 11 to 12 quarts of transmission fluid for a complete fluid change, including the torque converter. It's important to check the owner's manual for your specific model year to confirm the exact capacity and type of fluid recommended. Always ensure the vehicle is on level ground when checking or adding transmission fluid.
There is a drain plug in the transmission pan.
Transmission fluid is added through the dipstick tube.
Transmission fluid is added through the dipstick tube.
In the 1997 Mercury Villager, the Transmission fluid dipstick is located on the driver's side of the engine just in front of and below the master cylinder/brake fluid check. The 97 Villager has a bulbous knob on top with no indication that it is the Transmission fluid.
Auto transmission fluid.
The Mercury Sable transmission has a fluid capacity of 12 quarts. You can use any SAE certified automatic transmission fluid.
If you drained the pan, it will take about 4-4 1/2 qts to fill it. If you drained the whole transmission it will take more like 8 or 9.
Motorcraft MERCON automatic transmission fluid for the automatic transaxle ( according to the owners manual )
5