Park vehicle on a level surface. Drain the oil and replace the oil filter. Add 4 quarts and start the engine. Run the engine for at least 1 minute. Shut off and wait 1 hour. Check the oil level and add as necessary to the full mark. You now know what the capacity is.
The timing marks for the cam sprocket on a 98 S10 is on the front. The marks for the crank shaft is on the oil pump gear.
I have an 89 s10 with a 2.8 V6. It gets about 22 city, 25 highway.
222
The answers I found were: 650 ml or 22 oz
22 foot/lbs
669 ÷ 22 = 30.409... You can fully fill 30 contrainers.
22
22 quarts
The best oil for an R-22 system is typically mineral oil, specifically alkylbenzene oil, which is commonly used due to its compatibility with R-22 refrigerant. This type of oil effectively lubricates the compressor and is designed to work well with the properties of R-22. When retrofitting or servicing an R-22 system, it's crucial to ensure that the oil used matches the system's specifications for optimal performance and efficiency.
R-22 is a gas ued in the air conditioning. there is no oil in the R 22 gas. The gas when circulated in the compressor it come in contact with the oil which is present inside the compressor used as a lubricant.
22 containers can be fully filled.
I have a '98 s10 with the 2.2L 4 cylinder and auto transmission, and I average 20MPG mixed. I have never seen it over 22, and it rarely goes under 19 (this is all with mixed driving).