0
What else can I help you with?
Did Pontiac use thin rotors on their 2003 Aztek that cannot be resurfaced?
It's not just the 2003...my 2001 had the same problem. Most "new" rotors cannot be resurfaced. There's generally not enough meat on them when you get to the point of needing brakes to salvage them. Most times, it's easier to buy new ones, although it's not always cheaper. I've done this on both of mine, and the first time was disappointed that I couldn't resurface them. Good, thick rotors have gone the way of the dinosaur.
How do you install brake pads and rotors in a 1997 Toyota Camry 4-cylinder?
To replace the pads, just remove the calipers, retract the pistons, and set nre pads in place of the old ones. To replace the rotors, remove the old ones and set new rotors in their place. Before driving the vehicle, repeatedly depress the brake pedal several times until it feels firm like it works. Make sure you spray the new rotors with brake parts cleaner thuroughly after you install them!
How much does it cost to fix front brakes and replace rotors on 2003 Honda crv?
Pads are $40.00 to $100.00, and rotors are $124.00 to $204.00, DIY. Count on four times that at a shop.
How many times can you charge 3D glasses?
Active 3D glasses are battery powered. Most of them can be charged hundreds of times before the batteries may need replacing. The number varies from one manufacturer to another but replacing batteries tends not to be a high cost compared to other costs of owning and using 3D television.
Why does a 1991 jeep Cherokee Laredo turn over so many times before it starts?
try replacing the crankposition sensor my 89 did the same thing and that is what fixed it for me.
What does it mean to machine the brake rotors and drum brakes?
The rotors in disc brakes and the drums are what the pads and shoes rub against to stop a car. With use, the surface can get grooves in it or a build up of rust scale; reducing the braking efficiency. To machine the rotors and drums, they are put on a lathe that cuts a new smooth surface on the face of each. Depending on wear, any given rotor or drum can probably be turned 2 or 3 times before needing to be replaced.
Why does my 1991 jeep Cherokee Laredo turn over so many times before it starts?
i have an 89 and mine did the same thing try replacing the crank position sensor.
How much should it cost to replace the rotors on your 2004 Saturn Ion?
DIY: you can buy the rotors ranging from $25 to $75 each and even more for "performance" rotors. It's a relatively simple job but if you haven't done it before it might be best to leave it to a professional. If you're having a shop do it you'll pay many times that price. Probably $200 or more for the labor and just guessing, probably well over $100 for the same parts that have the dealer and/or shop markup.
Gears will some times not go in on my 1997 laguna sport?
Your clutch needs replacing!If automatic trans then trans needs replacing!
How many times can brake rotors be resurfaced?
You can only have them turned a few times until they are too thin to be considered safe. Usually this thickness is stamped on the rotor.
What is the probability that three times in a row without looking you can pick out an outmeal cookie without replacing them?
whats the probability that three times in a row without looking i can pick out an outmeal cookie without replacing them?
Replacing a clay sewer pipe your self.?
Yes, no problem I did it many times
