The 7117 Simplicity typically requires about 5 quarts of oil, depending on the specific engine model. It's important to use the recommended oil type, which is usually a high-quality detergent oil with a viscosity of 10W-30 for most applications. Always check the owner's manual for precise specifications and maintenance guidelines.
Best to use Simplicity Multi-purpose Hydro Oil, part #1685516. Not much more in price than an alternate, and get the proper weight and additives.
According to the Simplicity manual for models 7018, 7117, and 7119, hydrostatic transmission and tractor hydraulic systems use fluid from gear transmission (reduction gear) case. Dexron automatic transmission fluid (or equivalent) is recommended. Fluid capacity is 3 quarts (2.8L) and should be checked every 25 hrs of operation. Fluid and filter should be changed at 400 hr intervals.
As much as keefe
Hi, your Eaton model 6 hydrostatic transmission requires straight 30 weight oil according to the manual.
The answer will depend on how much aviation oil.
If you have 100 kilos of oil in a sealed can and you cool it or warm it, the weight of the oil will not change. However the volume of the oil in the can will change.
90 weight oil corresponds to SAE 90 oil, which means it has a viscosity rating of 90. The weight of the oil is measured in centistokes at 100°C, which helps to determine how thick or thin the oil is. However, the weight of the oil in pounds depends on the volume of oil you are referring to.
The weight would depend on how much of each you had.
One quart of oil = 1.88 pounds The viscosity of the oil has no bearing on actual weight.
The weight of 40ml of oil will vary depending on the type of oil. On average, 40ml of oil weighs about 36 grams.
kg is a measure of weight; liter is a measure of volume
1 gallon of oil weighs 7.344 lbs.