The International Harvester (IH) DT 466 engine typically holds around 10 to 12 quarts (approximately 9.5 to 11.4 liters) of coolant, depending on the specific model and configuration. It's essential to consult the engine's service manual for the exact capacity and any additional recommendations for your application. Always ensure the cooling system is properly filled and maintained for optimal performance.
34 quarts
The International DT466 diesel engine typically holds around 10 to 12 quarts (approximately 2.5 to 3 gallons) of coolant, including antifreeze, depending on the specific configuration and installation. It's important to consult the engine's service manual for precise specifications, as variations in the cooling system can affect capacity. Always ensure to use the correct type of antifreeze as recommended by the manufacturer.
No, it is an International engine.
466 tones
Around 466 cubic inches
14% of 466 = 14% * 466 = 0.14 * 466 = 65.24
4357345745873457 + 466 = 4357345745873923
466 / 2 = 233
1, 2, 233, 466
720-466-5174
On a 7400, with a 466DT engine, the snow valve is located on the engine side of the air intake housing; which is located on the driver's side of the engine compartment.
You need to specify a year, because it does make a difference. We used Rotella 50/50 blend in our 1999 - 2001 trucks. What you really need to do is look up the nearest Navistar International dealer, give their maintenance department a call, and talk directly to them. Again, the coolant requirements can vary according to model year, and you want to be especially certain that you're using the proper coolant in a DT466, as it's a wet sleeve motor, and the use of improper coolant can have disastrous consequences.