7.0 Quarts
on a 2.8 Lt engine its by the oil filter
Fiat recommends 3,75 lt 10/40 whith filter
21.5 lt
3.2 lt if full empty , 2.9 lt change
With an engine with gasoline it needs 5,9 lt. if it is diesel 6,5 lts. Take care, do not overfill .
4.5 quarts
One 48 ounce bottle in my 2004 LT 2000 with 18 HP.
I believe that is ( 50 PSI at 1500 RPM )
To change the oil in a Suzuki LT 90, first, warm up the engine for a few minutes to thin the oil, then turn it off. Next, locate the oil drain plug underneath the engine, remove it, and let the old oil drain completely into a suitable container. Replace the drain plug and refill the engine with new oil through the designated fill cap, using the recommended oil type and quantity. Finally, check the oil level with the dipstick and ensure everything is secure before starting the engine again.
1.05 qt. 1.0 lt.
All but the LT-1, which had a special oiling system on it, take 5, quarts. The LT-1, takes 5.5.
the oil cooler on the f250 7.3 lt is on the drivers side of engine below the exhaust manufold If it is a 6.0L it is in the front of the engine valley it has the part that oil filter screws into.