0
The 4L60E transmission typically requires about 11 to 12 quarts (approximately 10 to 11 liters) of fluid for a complete fill. However, the amount needed can vary depending on factors such as whether the transmission is being serviced or if it’s a complete rebuild. Always consult the vehicle's service manual for the precise fluid capacity and specifications.
What else can I help you with?
How much transmission fluid does a 4L60e transmission need after changing whole transmission?
ten quarts
How much transmission fluid does a 4l60e hold?
5-6 quarts for a filter change
What type of transmission fluid for 4l60e gm transmission?
Most all GM 4L60E's should use Dexron III.
How many quarts of fluid needed to fill a 4L60E transmission after a complete overhaul?
11 to 12 quarts for a complete overhaul ...
What is the transmission fluid capacity for a 1998 GM K1500 Z71 4L60E transmission when doing a filter change?
5 quarts
What is the fluid capacity for a 96 Chevy Tahoe 4x4 transmission?
Will a 1996 4l60e 4x4 trans fit in pace of a 1995 4l60e 4x4 trans
Is a 4L60E a manual transmission?
No , the 4L60E is an automatic transmission that GM uses
What is the correct transmission fluid to use in a 99' Chevy silverado you ask because you just had your transmission flushed and the price for transmission fluid was 19.98 that seems a little cheap?
Dextron or Mercon III is what the 4L60E transmission take. Use only that..
What is the transmission fluid capacity for a gm 4l60e transmission?
4L60-E takes 5 qts on filter change - 12 qts after overhaul (dry)
Which transmission is better a turbo 350 or a 4L60E?
4l60e
Is a 4l60E the same transmission as a 700R4?
NO.. Not even close. The 4L60E is a computer controlled transmission/ELECTRONIC transmission and the 700R4 is not.
How do you replace a shift solenoid for an 4L60E transmission?
To replace a shift solenoid in a 4L60E transmission, first, ensure the vehicle is safely lifted and supported. Disconnect the battery, then remove the transmission pan to access the solenoid; you may need to drain the transmission fluid. Locate the faulty shift solenoid, unclip or unscrew it, and replace it with the new solenoid. Reassemble the transmission pan, refill with fluid, and reconnect the battery before testing the transmission operation.
