1600000
need a diagram for fuel system for a 1996mercury mystyic?
You need to drain and remove the fuel tank to access the fuel pump on this vehicle.
The Villager does not have a test port. You need to tee into the line at the fuel filter.
The 110 model, 9.8 hp Mercury outboard, requires 3 oz of 2 cycle oil per gallon of fuel.
About 1/3 to 1/4 of a tank.
You need to tee in at the fuel filter connection, there is no schrader valve.
You'll need to install a tee into the line by the fuel filter to check it, there is no shrader valve.
The fuel pump on a 1999 Mercury Villager is located inside the fuel tank. To access it, you'll need to remove the fuel tank from the vehicle, as it is not externally accessible. Make sure to relieve the fuel system pressure and disconnect the battery before starting the procedure for safety.
The fuel pump on a 1993 Mercury is inside the fuel tank.
You'll either need to get that from a dealer or from a wrecking yard.
you need a minimum of 87 octane gas