answersLogoWhite

0


Best Answer

5000dollars

User Avatar

Wiki User

βˆ™ 15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much should it cost to replace steering column on a 97 Grand Am SE?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the parking light bulb in a 2002 Mercury Grand Marquis?

check the bottom of the steering column


Where can i find a steering column diagram for a 1984 Pontiac grand prix?

It is important to have everything in the steering wheel column in its correct place. A diagram for the 1984 Grand Prix steering wheel column can be found in its maintenance manual.


Where is the flasher fuse on a 1993 Pontiac Grand Am?

It should be located just to the right of the steering column under the dash. between the radio and column..


How do you replace the ignition switch on a mercury grand marquis?

It's located on the steering column 2 screws unplug the harnest


Where is the steering column on a Mercury Grand Marquis located?

Directly behind the steering wheel.


Where is the ignition switch located on a 91 Pontiac grand am?

it is located on the steering column


How do you replace an ignition switch on a 1992 Pontiac Grand Prix?

The switch is on the steering column about 18 inches from the floor under the dash. There are 2 screws that hold it on.


How do you tighten the steering column on a 1987 Pontiac Grand AM?

Take it to the shop:)


Headlight fuse location on the 1995 Pontiac grand am?

In the steering column, the grand am has a multifunction fuse box


Where is the Location 2000 grand marquis fuse box?

Underside steering column


How do you get at the multi function turn signal hazard switch on a 95 Pontiac Grand Am in order to replace it?

It's a real pain, but you have to remove the plastic cover over the steering column, and tilt the steering column all the way down to get to the screws, there is two at the left of the switch and one on top. It should lift straight up off of a electrical connection and the new one just plugs in, then replace screws and plastic column cover, (the cover is the real harrd part)(both off and on),


How do you get at the multi-function turn signal hazard switch on a 95 Pontiac Grand Am in order to replace it?

It's a real pain, but you have to remove the plastic cover over the steering column, and tilt the steering column all the way down to get to the screws, there is two at the left of the switch and one on top. It should lift straight up off of a electrical connection and the new one just plugs in, then replace screws and plastic column cover, (the cover is the real harrd part)(both off and on),