0
What else can I help you with?
How do you replace low beam bulb 2008 Colorado?
try coloradofans.comit as everthing you could wanna know about colorados, it has helped me out sooo much
How much on average does it cost to replace lights on your car?
The cost of the bulb (or the light fixture, if you're replacing sealed beam headlights) if you do it yourself.
How much does it cost to replace the main beam of a house?
$7,300.00
How much does it cost to replace a brake light bulb on cadillac cts?
a buck for the bulb and 2-3 minutes of your time to replace it
What could be the problem if the high beam on the driver's side works but the low beam does not on a 1996 Ford Taurus?
It is very likely the bulb. The low beam gets much more use and most often fails first.
How much does it cost to replace a ford escape brake light?
the price of the bulb
How much energy do you save per hour if you replace a 60 W light bulb with a 55 W light bulb?
18,000 J
How do you replace the high beam bulb on a 1999 Mercedes slk?
Hi, Take off the plastic cover to the back of the light and its the top bulb in the light unit, take off the the leads to the bulb, unclip the metal holder and take the bulb out. replace bulb with new one. I have just changed mine to Ice Blue bulbs. Is looks great and so much brighter than the other ones that where in the car.Some details to help the above answer:The low beam and the high beam have the same mechanism. When you remove the plastic cover (the tab is on the top press down and swing out), the low beam bulb is the one on the top and the high beam the one below it.The clip has a U shape tab at one end and two legs at the other end. The center of the clip presses against the bulb and holds it. You need to push the U shape tab to the left (facing the car) to unhook it from the bracket.It becomes much easier if1. You use a flashlight or portable light to illuminate the back of the fitting while carrying out the procedure so that the clip is clearly visible.2. Use (needle-nose) pliers to move the wire clip left (when facing the car) than your fingers.3. Do not unclip the bottom portion of the clip. Just release the top as in the answer above and gently let it swing out and down while still attached at the bottom. The bulb can be removed this way. After you place the new bulb, you can just swing back the clip and hook it back to the top bracket.
What watt fluorescent bulb can you use to replace a 60watt incandescent bulb?
fluorescents are about 5x as efficientso a 12W will give about as much light
How much does it cost to replace the bulb on a Honda civic headlight?
$13 plus 5 minutes of your time.
What is the best method for safely using a light bulb remover to replace a light bulb?
The best method for safely using a light bulb remover to replace a light bulb is to ensure the power is turned off before attempting to remove the bulb. Use the remover to gently twist and loosen the bulb, then carefully remove it from the socket. Be cautious not to apply too much pressure or force to avoid breakage.
All brake lights are out on 1998 Mercedes E320?
First, check all your fuses and relays. Find the fuse for brake lights and check/replace it. Then, M-B cars are prone to oxidation on their lamp holders--the small plastic part that holds the actual light bulb. First, try some very fine grit sandpaper (400 or so) and clean all these terminals, and then put in a new bulb. A new bulb costs very little and you might as well replace the old one anyway. Put the new bulb and bulb holder in, and see if this works. If not, try cleaning the terminal on the lamp housing it remove any oxidation there as well. It would be odd to have all 3 lights fail. Much more likely to be a fuse or bulb and holder issue.
