0
Near to 400 pounds.
One pound of steam requires the input of 1080 btus of heat added to 32oF water at atmospheric pressure. One ton or 2000 pounds requires the input of 2.16 million btus, and a boiler with 80% efficiency (common value) will need 2.7 million btus of heat from the combustion of the wood. Assuming the wood has a btu heat content of 6500 btu/lb (commonly most woods are 6000 to 7000 btu/lb) then about 415 pounds of wood are required to produce 1 ton of steam. In practice only 375 pounds of wood are needed to maintain a steady output of one ton of steam in a boiler, as the water when reintroduced into the boiler is very close to the steaming temperature and doesn't need to be heated from 32oF.
What else can I help you with?
Can wood be burned to generate electricity?
Yes. A steam engine can be used to generate electricity. Obviously, you can boil water with wood. Although, The Navy prefers to use Nuclear Power.
Can you clean wood floors with a steam mop?
No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.
Is it safe to use carpet steam cleaning equipment on my wood furniture?
It is not safe to use steam on wood furniture. The steam could stain the wood.
What are biofuels and how could they contribute to sustainability?
Biofuels are biomass( fuels) that generate energy from wood burning. They contribute to sustainability by producing steam for both heating and electricity.
What does train steam engine use fuel for?
A steam engine uses fuel to generate heat, which converts water into steam. This steam then expands and drives pistons or turbines, creating mechanical energy to power the train. Common fuels include coal, wood, or oil, which are burned in a firebox to produce the necessary heat for steam production.
How can wood be utilized to generate electricity efficiently?
Wood can be utilized to generate electricity efficiently through a process called biomass power generation. In this process, wood is burned to produce heat, which is then used to create steam that drives a turbine connected to a generator, producing electricity. This method is considered renewable as new trees can be planted to replace the ones used for fuel.
What does the steamboat need to work?
A steamboat requires a steam engine, which operates by heating water in a boiler to create steam. This steam then powers pistons or turbines that drive the boat's propellers or wheels. Additionally, a fuel source—such as wood, coal, or oil—is needed to generate the heat for the boiler. Finally, a water source is essential for producing the steam.
How can you get a generator working by garbage?
# Bury the garbage. Let it decompose. It will generate methane gas. Capture the methane and use it to run an engine or gas turbine. Use the engine or turbine to turn the generator. # If the garbage is wood, grass, or other material that can be burned, then burn it. Use the heat to boil water into steam in a boiler. Use the steam to turn a steam turbine. Use the steam turbine to turn the generator. Both of these methods (and there are more) are already used world-wide to generate power.
Does oreck steam-it work on wood floors?
No, wood floors should have no steam products used on it. These will cause damage to the floor even if they are polyurethaned.
How can I unbend wood effectively?
To unbend wood effectively, you can use steam bending or lamination techniques. Steam bending involves heating the wood with steam to make it more pliable, while lamination involves gluing together thin layers of wood to create a curved shape. Both methods can help you unbend wood successfully.
How does wood produce electricity?
Wood can produce electricity through a process called pyrolysis, where it is heated in the absence of oxygen to create a gas that can be burned to generate electricity in a process called gasification. Alternatively, wood can be burned directly to produce heat, which can then be converted to electricity through steam turbines or other power generation methods.
How can I effectively use a building steam box for my woodworking projects?
To effectively use a building steam box for woodworking projects, follow these steps: Prepare your wood by cutting it to size and ensuring it is clean and dry. Fill the steam box with water and heat it to create steam. Place your wood inside the steam box and let it steam for the recommended time based on the type of wood and thickness. Remove the wood from the steam box and quickly shape or bend it while it is still hot and pliable. Allow the wood to cool and dry in the desired shape before finishing your woodworking project.
