I just removed both in my 1995 Neon to replace the gaskets. There are 6 bolts (all 10mm) that hold each headlight assembly to the car body: 2 on top that need to be completely removed 2 inside the inner grill that only need to be loosened 1 at the grill that needs to be removed 1 between the headlight assembly and bumper/fender. To get at this bolt, you have to work a 10mm box wrench or ratchet from underneath the car behind the bumper. There is not much room to turn the wrench so it does take a while.
nthow to change the beltson the dodge neon
A 1998 Dodge Neon uses green antifreeze.
The lifters in a Dodge Neon are not adjustable.
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
It is not a cover, the headlight is a sealed assembly.
Where is the low-side port located on a 1998 dodge neon?
first check your fuses then test the switch in different positions with a volt meter.
9007
yes but you must also change the fans !
The engine is dropped out of the bottom on a Dodge Neon.
A Dodge Neon uses many different fuses.
9007