Disconnect the negative (-) cable from the battery for few minutes, this will erase also your preset radio stations. Your Bluetooth settings remain untouched.
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
Take it to advanced auto parts and have them clear the codes ... its free.
You use the test monitor and scroll down to clear code
Try disconnecting battery for about 10 mins. or have vehicle scanned to determine problem or clear codes
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it
To reset the "Service Engine Soon" light on a 2008 Nissan Frontier, you can first disconnect the negative battery terminal for about 15 minutes to clear the engine codes. Alternatively, you can use an OBD-II scanner to read the error codes and clear them directly. If the light returns after resetting, it indicates that the underlying issue still needs to be addressed. Always ensure that any necessary repairs are completed before resetting the light.
To reset the "Service Engine Soon" light on a 2004 Nissan Armada, first ensure that the underlying issue has been resolved. Then, you can use an OBD-II scanner to clear the trouble codes, which will turn off the light. Alternatively, you can disconnect the negative battery terminal for about 15 minutes to reset the system. Remember to reconnect the battery afterward.
GO TO A AUT ZONE TELL THEM THE CHECK ENGINE LIGHT IS ON THEY WILL COME OUT AND HOOK SOMTHING UP TO IT . THEY WILL GIVE YOU A LIST OF WHAT COULD BE THE PROBLEM AND ASK THEM TO CLEAR IT, THEY WILL DO ALL THIS FOR FREE- HOPE THIS HELPS- AMBER
With a scan tool after repairing the cause of the fault code.With a scan tool after repairing the cause of the fault code.
Nissan is a Japanese automotive manufacturer. A Nissan dealer would usually have a service department, and may have an auto body shop as well. I can't give a clear answer to your question as it depends.
To reset the service engine light on a 2005 Nissan Frontier, you can use an OBD-II scanner to clear the trouble codes. Alternatively, you can disconnect the negative battery terminal for about 15 minutes, which can also reset the light. However, if the underlying issue hasn't been resolved, the light will likely turn back on. Always ensure to diagnose and fix any issues before resetting the light to avoid further problems.
dissconnect the battery overnight to clear the codes. if that does not work then u have more problems. or you can hook it up to a scanner to cear the codes but they are high. you might take it to autozone and they will cear them for u