I have the clutches in my kx 85 but the clutch rode that goes to the clutch cable keeps Hitting the clutch Case How do I fix it
kx85 by alot
A kx85 gose about 70 75
Are you replacing a whole clutch or just the clutch plates?
The transmission must be removed to install a new clutch.The transmission must be removed to install a new clutch.
how to install fan clutch sensor in mercedes 1984 500 sel
Yes, a stock CR85 is faster than a stock KX85.
Cr85 is the faster and stronger bike. The Kx85 is a little smaller and not as strong.
Remove the transmission. Remove the clutch plate and springs. Remove the clutch. Reverse the process to install the new clutch.
The kx85 is the newer of the two as the kx80 is no longer made. Apart from the extra few cc's you also have to take into account that many other things have advanced over the years making the kx85 the superior bike. Even the models of kx85 have improved over the years so a model that is several years old will not be as fast as a new kx85. Rider ability also have to be taken into account but the kx85 is the superior bike.
This requires special tools to remove and install the ac clutch and bearing. The air gap on the ac clutch must be done during install.
You needa specialtool to remove it and install it. You will need to measure the air gap between the clutch plate and pulley as you install it, .010" to .015" will usually do it.
about 85mph