0
It's not easy. You have to: 1: unscrew the three bolts above the clear plastic cover of the dash 2: Unscrew the two black bolts that hold the stereo in then pop that panel out 3: Unscrew 4 gold bolts for the large panel below the steering wheel, these are just above your ankles, two of them are hidden behind the hood pull, and unsnap that panel 4: Under this panel there is a metal plate. Remove the top two screws and loosen the middle set. this allows you to access the next two screws. 5: Under the top of the metal plate are two bolts that hold the top panel in place, remove these. 6: Pull out the top panel, be careful to disconnect the two clips that latch behind the light knob before you pull the panel completely off. 7: Unscrew the bolts that hold the dash piece on, I'm sure you can figure it from here...
What else can I help you with?
How do you remove the dash from a 2002 Ford Ranger?
How do your remove the dashboard on a 2000 Ford Ranger?
How do you remove a flywheel from a 1999 ford ranger?
How do you remove the flywheel on a 1999 ford ranger
How do you remove the dashboard fascia on a 1999 Chevy Astro?
How do you remove the dashboard fascia on a 1999 Chevy Astro?
How do you remove the dashboard from a 1998 ford ranger?
Do not get involved take it to a garage they are a piece.
Where is the ECM computer located on a 1999 ford ranger?
On a 1999 Ford Ranger, the Engine Control Module (ECM) is typically located under the dashboard on the driver's side, mounted on the firewall. It can usually be found near the brake booster assembly. To access it, you'll need to remove any panels or covers obstructing the area.
How do you remove a 1999 Ranger transfer case shift motor?
How to peplace A RANGER transfer case SHIFT MOTOR
How do you remove the dashboard for 1999 dodge ram b1500 van?
The 1999 Dodge Ram dashboard is held in place with six retaining bolts and 10 retaining clips. Remove the retaining bolts and pry outward on the retaining clips. The dashboard will come off in two pieces.
How do you remove instrument cluster on 98 Ford Ranger to replace cluster bulb?
DIMMER SWITCH OR WHAT?"How_do_you_remove_instrument_cluster_on_98_Ford_Ranger_to_replace_cluster_bulb"My 1995 Ford Ranger dashboard is dark, the control to the cab light is operational. I have installed a JVC Stereo with is the only light I have on the dashboard. Do I need to remove the steering wheel to get to the components of concern?
Where is the gem module located on a 1999 ford ranger xlt?
The GEM (Generic Electronic Module) on a 1999 Ford Ranger XLT is typically located behind the dashboard, specifically on the driver's side. It is mounted on the left side of the vehicle, near the steering column or just above the brake pedal area. To access it, you may need to remove the lower dash panel.
How do you remove a transmission on a 1999 Mazda b3000?
Look for information on 1999 Ford Ranger 3.0L as well. (Same vehichle.)
How do you replace dashboard lamps on 1999 Saturn SC1?
Remove the instrument cluster then replace the bulbs. = =
How do you replace a heater core on 1999 Ford Ranger?
To replace the heater core on a 1999 Ford Ranger, first disconnect the battery and drain the cooling system. Remove the dashboard and the heater assembly, which involves detaching various screws and electrical connectors. Once the heater assembly is accessible, take out the old heater core and install the new one, making sure to seal any connections properly. Reassemble the dashboard and reconnect the battery, then refill the cooling system and check for leaks.
