0
What else can I help you with?
How do you remove front bumper from a MCI j4500 bus 1998?
To remove the front bumper from a 1998 MCI J4500 bus, first disconnect the electrical connections for any lights or sensors attached to the bumper. Then, locate and remove the bolts or screws securing the bumper to the chassis, which are typically found underneath and on the sides. After all fasteners are removed, gently pull the bumper away from the bus, being cautious not to damage any surrounding components. Ensure to have a helper if needed, as the bumper can be heavy and awkward to handle alone.
How far does the danger zone extend around a bus?
The danger zones extend as much as 30 feet from the front bumper, 10 feet from the left and right sides of the bus and 10 feet behind the rear bumper of the school bus.
How much oil do you but in the ac compressor for MCI bus?
As much as it takes. There are several models of buses made by MCI, and the specs vary between those models. You want something more specfic, then you give a specific model of MCI bus.
Where is the fuse panel located on MCI 9 buses?
The MCI 9 buses are used as coach rides, travel buses, and party buses. The product manual or owner's manual will show the parts of the bus and the locations. The fuse panel location on the MCI 9 bus can be found by using the manuals.
Does a 1962 MCI challenger bus have an air assist clutch?
Yes the MCI MC5 has Air assist clutch its at the drivers side on the transmission which is a 4speed .
Why did MTA bus retire there MCI Classics?
They Didnt Retire Them There Still Running
How many passengers does an MCI G4500 Greyhound Bus hold?
55 passengers.
How do you mount bumper to 69 vw bus?
To mount the bumper on a 1969 VW Bus, first ensure you have the correct hardware and brackets specific to the model. Align the bumper with the mounting holes on the bus, then insert the bolts through the bumper brackets into the chassis. Tighten the bolts securely but avoid over-tightening, as this can damage the bumper or brackets. Finally, check the alignment and make any necessary adjustments for a proper fit.
Where is a Vin located on a 1990 mci bus?
On a 1990 MCI bus, the Vehicle Identification Number (VIN) is typically located on a metal plate attached to the driver's side dashboard, visible through the windshield. It may also be found on the driver's side door frame or on the chassis, often stamped into the metal. In some cases, the VIN can be located in the maintenance records or on the vehicle's title.
Is a bus rear or front wheel drive?
A bus is front wheel drive.
Who is the guy's name that his car bumper was pulled off by Selena's bus?
Kenneth " Wharton " Martinez
How do you tow a bus with heavy wrecker?
Run chains around the steer axle, put a support bar under the front frame rail so you don't rip the bumper off, remove the axle shafts, and book it.
