I used this guide when I changed the clutch in my 97.
http://www.miata.net/garage/clutch2.html
26 psi
4 quarts
Should, I believe you will have to switch the seat frames though
2 quarts
it is to cange the headlamp
To replace the power window motor in a 1996 Mazda Miata, first, remove the door panel by unscrewing the fasteners and gently prying it off. Disconnect the window switch and any other wiring connected to the panel. Next, unbolt the window motor from its bracket, detach the window regulator if necessary, and replace it with the new motor. Reassemble the door by reconnecting the wiring, attaching the panel, and ensuring everything is secure.
The airbag module on a 1996 Mazda Miata is located along the front of the vehicle's frame. It is positioned so that it can immediately detect impacts and deploy the airbags.
The one you most likely can't find is right on the back of the fuse receptacle. It's a fusible link and requires you to replace the receptacle.
No this clutch needs to be bench bled prior to instalation.
there is . make sure the resivoir is filled up
4-1-2-3 Regards Sal
No it does not, it is a non-interferenceif the timing belt break the valves will not collide into the pistons.