You need a scan tool to reset codes after repair.
To reset the check engine light on a 2001 Dodge Caravan, you can disconnect the negative battery terminal for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to clear the codes directly if you have access to one. However, if the underlying issue is not resolved, the light will likely come back on.
The only proper way is with a scan tool.
try disconnecting battery for 15 minutes
Resetting an engine light on a 1996 Dodge Caravan SE is very easy to do. The battery can be disconnected for up to one minute to make the check engine light go off.
The change oil light is reset by turning the key on, engine off, and pressing the gas pedal three times.The check engine light can only be reset with a scan tool. The cause of the fault needs repaired or the light will return.
A scan tool is required.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
To reset the engine light in a 2003 Dodge Caravan, you can disconnect the negative battery cable for about 10-15 minutes. This will clear the engine codes and reset the light. Alternatively, using an OBD-II scanner to clear the trouble codes can also reset the engine light. However, ensure that any underlying issues causing the light to illuminate are resolved before resetting it.
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
hoe do you reset the check engine light in a 1995 land rover
how do i reset the check engine light on a 1999 acura 3.2tl