Well, assuming that you are talking about headlights, the low beams are the dimmest settings for the drive headlights, while high beams are the brightest setting.
You use low beam headlights when you're in a town or city in any location.
On most vehicles, the low beam headlights are the outside pair of lights. This is true when the headlights are side by side. When the two sets of lights are stacked, the low beam headlights are usually on the bottom.
Low beam headlight should illuminate 85 feet of the roadway. Newer low beam headlights illuminate more of the road than older headlights.
All vehicles are required to have low- and high-beam headlamps. If your low-beam headlamps both fail after dark, try switching to high beam. If the high beams don't work either, switch on the emergency flashers. In either case, get the car out of traffic and off the road as quickly as safely possible.
Low beam headlights and fog lights if the vehicle has fog lights.
Low-beam headlights that are not property adjusted can make them as bright as high-bead headlights. They also can cause you to not see the full road ahead.
low beam
Check the grounds for the headlights.
Low beam headlights must be turned on when driving in low visibility conditions, such as at night, in fog, rain, or snow, or when approaching other vehicles.
No. These lights are only to used in an emergency just turn your headlights on low beam.
Yes, headlights must be on low beam within 500 feet of an approaching vehicle.