In the Hardstaff OiGi (TM) dual fuel system the diesel fuel can be as low as 25-30% of it's normal value when combined with gas to acheive similar energy outputs.
In a diesel engine the fuel represents only 1-2% of the fuel mixture, the rest being air. This is confused slightly in modern engines as post ignition injection occurs to provide a longer burning flame front to increase torque output.
So I think your answer can be 30% diesel 70% gas
because a diesel engine ignites its fuel with pressure, and not with a spark like a petrol engine. that is why a petrol engine does not need as high a compression ratio as a diesel engine
In diesel engine fuel to power ratio is 1:50
The compression ratio of a Diesel ranges from 14:1 to as high as 25:1. I agree just depends on engine.
There is no required a/f ratio on a diesel. It can be as low as 100:1 at no load idle.
The diesel engine can operate at 12:1 to 24:1 at idle.
Greater compression = greater fuel consumption = greater power
The Diesel
Because of higher compression ratio.
between 18 and 25 to one depending on engine I agree. It all depends on what engine you have.
Petrol or gasoline in a diesel will cause internal engine damage. if petrol is used in diesel engine it may cause explosive sound with burning ....bcz high compression ratio ......
Usually between 16:1 and 22:1
It has a compression ratio of 17.5:1