answersLogoWhite

0

In a two-stroke reed valve engine the reed valve is used to seal the fuel air mixture in the crankcase.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Can a reed valve effect compression on a Ski Doo MX 800 HO?

Yes, a reed valve can affect compression on a Ski Doo MX 800 HO. If the reed valves are damaged or not sealing properly, it can lead to a loss of compression in the engine, resulting in decreased performance and efficiency. Properly functioning reed valves ensure that the air-fuel mixture enters the combustion chamber effectively, maintaining optimal compression and engine performance. Regular maintenance and inspection of the reed valves are essential for the overall health of the engine.


Your outboard leaks fuel out the air box?

The most likely culprit would be a flooding carburetor, which a good cleaning and possibly a gasket kit should cure. Other possibilities would include a blocked fuel recirculating check valve, or a broken reed valve.


How do you check a reed valve?

To check a reed valve, first remove it from the engine or assembly. Inspect the reeds for damage, such as cracks or warping, and ensure they are sealing properly against the valve seat. You can also perform a functional test by gently pushing on the reeds to see if they open and close freely. Finally, check for any debris or buildup that could impede their operation.


How can i make my Mitsubishi tle 23cc 2 stroke engine go faster and have more power?

get a smaller sprocket or bend the reed valve opened a little bit more but not to much or it will bog the engine


Kawasaki KX500 engineWhy is their a hole in the side of the head near the reedimgurcom/a/HR6qpYo?

KX500 Hole near Reed User Kawasaki KX500 engineWhy is their a hole in the side of the head near the reedimgurcom/a/HR6qpYo? ChatGPT The Kawasaki KX500 is a legendary two-stroke motocross motorcycle that was produced from 1983 to 2004. It featured a powerful 500cc two-stroke engine known for its performance and reliability. However, without being able to view the specific image you mentioned, it is difficult for me to provide a precise answer regarding the specific hole near the reed valve. That being said, I can provide some general information about the Kawasaki KX500 engine. Two-stroke engines, including the one used in the KX500, typically have several openings and ports on the cylinder head for various purposes. The reed valve is an essential component in a two-stroke engine. It is responsible for controlling the flow of air and fuel mixture from the carburetor into the engine's crankcase. The reed valve opens and closes based on the pressure differences within the engine, allowing the fuel mixture to enter the crankcase during the engine's intake stroke. As for the hole you mentioned, it is possible that it is related to the reed valve's operation. The hole could be a part of the intake system that helps direct and control the airflow. It may also serve as a passage for the air and fuel mixture to enter the engine. However, without more specific information or an image, I cannot provide a definitive explanation for the hole you are referring to. If you have further questions or if you can provide more details, please feel free to ask, and I'll do my best to assist you.


What is a reed for a dirt bike for?

A reed for a dirt bike is a component of the intake system, typically made of lightweight materials like fiberglass or carbon fiber. It functions as a one-way valve that allows air and fuel mixture to enter the engine while preventing backflow during the exhaust cycle. This helps improve engine efficiency and performance by ensuring optimal intake and combustion. Properly functioning reeds can enhance throttle response and overall power delivery.


Why does my gas Yamaha golf cart have no power?

If you press the gas and all it seems to do is maybe Idle, the problem is the reed valves. I have ran into this problem 2 different times. That is wacked! G2 engine is 4 stroke ,so it does't have a reed valve!


Why does my Yamaha g2 gas golf cart have no power?

If you press the gas and all it seems to do is maybe Idle, the problem is the reed valves. I have ran into this problem 2 different times. That is wacked! G2 engine is 4 stroke ,so it does't have a reed valve!


Will high octane gas inprove performance in a 2 stroke engine?

High octane gas for any engine is good to prevent build up on valves and internal combustion parts. If your familiar with the way a two stroke engine works, the fuel and oil enter the lower end of the motor where the crankshaft is. When the fuel and oil is dumped into that area, the oil portion of the fuel lubricates the lower end and piston walls and the gas evaporates up through reed valves ( which are nothing like your car valves and are not mechanical) and is combusted in the combustion chamber and then it happens all over again. The only moving parts in a two stroke engine are the crankshaft and the piston unlike a 4 stokre engine which has a crankshaft, a piston, lifting rods, or hydraulic lifters, and a separate exhaust valve and intake valve, and on most cars there are more than two of each. You might notice a little more pep out of your engine and the higher the octane the better burning with the ethanol that's in the fuel lately, but I wouldn't spend the extra money on the better fuel if it is a stock engine 2 strokes are great in the fact that you really cant kill em. Hope this helps.


Will a damaged reed valve on Honda cr250 stop it from kick starting?

Wouldnt have thought so mate ,depends on the extent of the damage,reed valve damage will only bring the power down and give performance issues i would say ,ive just done the piston on my cr250 1999 and i put it back together and the power was down so i stripped it again to find the reed valve was damaged


How does a two cycle engine work?

The piston sucks the fuel in from underneath through the reed cage and its forced up the holes in the side of the cylinder to the top of the piston, then it ignites and goes out the exhaust


Where are the reed valves on engine?

Reed valves are typically found in two-stroke engines, often located between the intake manifold and the crankcase. They function as one-way valves, allowing the air-fuel mixture to enter the crankcase during the intake stroke while preventing backflow during the compression stroke. In some designs, they are mounted directly on the cylinder or the intake port. Their placement helps optimize engine performance and efficiency by ensuring proper air-fuel flow.